Wear-resistant alloy castings, bearings, bimetallic wear plates, liner plates and bushings - cast and machined to your drawing.
18 November 2026
Zinc-aluminum and high-strength aluminum ingots, melted to your grade, composition window or performance target - ingot shape and unit weight matched to your furnace.
Ingot shapes and unit weights →18 November 2026
High-alloy tool steel face on a low-carbon steel backing, 62±2 HRC, machined flat for mill guides and chock liners.
Tool steel clad thickness →17 November 2026
Hard wear layer bonded to a tough steel backing, cut, formed and drilled to drawing for chutes, hoppers and transfer points.
BT-CW build-up options →13 November 2026
Slide-way and guide plates where friction and galling matter as much as wear - machined flat and drilled to drawing.
305K flatness and fixing →13 November 2026
Self-lubricating wear alloy liner plates for sliding surfaces: 120 °C, 5 MPa, 40 m/s, grooves and holes machined to drawing.
YH-ML temperature and pressure →13 November 2026
Lead bronze thrust rings with four counterbored holes on a pitch circle, faces turned in one clamping for parallelism - machined to drawing, 4 pieces minimum.
Thrust washer dimensions →13 November 2026
Spherical seat liner halves in nickel-aluminum bronze ZCuAl9Fe4Ni4Mn2 (9-4-4-2) for wheel loader and hauler ball-and-socket joints - cast and finish-machined to drawing.
Ball socket liner drawings →13 November 2026
High-wear zinc-aluminum alloy liner plates and slide plates, cast and machined flat with counterbored fixing holes to your drawing.
ZA303 liner drawings →13 November 2026
High-strength ZA303 zinc-based alloy bearing shells and bushings with excellent load capacity, low friction and long service life - a cost-effective replacement for Babbitt metal.
ZA303 hardness and size range →13 November 2026
Centrifugal and sand-cast copper alloy parts - tin bronze, aluminum bronze and brass bushings, copper sleeves and retaining rings machined to spec.
Bronze grades and processes →13 November 2026
Sand, gravity and low-pressure cast aluminum alloy parts, including high-strength ZL205A, ZL104 and ZL101A structural castings and machine-tool components.
ZL205A casting specs →13 November 2026
Wear-resistant trunnion bearings, support-roller bearing pads and hollow-shaft bearings for rotary kilns, dryers and grinding mills.
Trunnion sizes and lead time →13 November 2026
Self-lubricating slide bearings, thrust washers and wear plates with graphite or polymer lubrication for low-maintenance machinery.
Slide bearing load and size →13 November 2026
Babbitt (white metal) bearing shells and oil-film bearings for heavy-duty rotating equipment - cast, bonded and machined to drawing, in tin-based and lead-based alloys.
Babbitt lining thickness →Send your drawing, sample photo or specification - we reply within 1 business day.