Shenyang Yuheng Metal Manufacturing
Wear-resistant alloy castings & bearings
HomeProductsArticlesAboutAlloy GradesContact
EN

Home / Alloy Grades / Bearing Alloy (Babbitt)

ZSnSb8Cu4

ZSnSb8Cu4 Tin-Based Babbitt (8-4 White Metal)  |  Bearing Alloy (Babbitt)  |  GB/T 1174

We make this grade. See the finished parts we produce with it  View products

Chemical Composition (%)

Sb7.0~8.0
Cu3.0~4.0
SnBalance

Mechanical & Physical Properties

Hardness≈24 HBW
Density≈7.3 g/cm³
Max service temperature<100 ℃

Typical Applications

large-machine bearingsbimetal bearingsautomotive engine bearing shellsbushes

Grade Overview

A tin-based Babbitt with a little less antimony than the 11-6 grade, used for large-machine bearings, bimetal bearings, automotive engine bearing shells and bushes. Lowering the antimony improves toughness, with strength and hardness slightly reduced - hardness is about 24 HBW - while anti-friction behaviour is close to that of ZSnSb11Cu6; working temperature is generally kept below 100 °C, which suits it to pouring thin-walled bimetal bearings. Load capacity is a little below the 11-6 grade and high-temperature performance is likewise limited. Use it for bearing linings and thin-wall shells in large equipment; control alloy composition and cooling rate during pouring to secure bond strength with the steel backing, and limit working temperature and load in the design. It is a common choice for general-purpose shells in large machines because the lower antimony level tolerates a little more distortion and shock; the lining is normally bonded to a bronze or steel shell, and the fit and clearance should be set so the oil film can carry the load.

Selecting ZSnSb8Cu4

ZSnSb8Cu4 is a tin-based Babbitt with a little less antimony than the 11-6 grade, used for large-machine bearings, bimetal bearings, automotive engine bearing shells and bushes. Lowering the antimony improves toughness, with strength and hardness slightly reduced, hardness being about 24 HBW, while anti-friction behaviour stays close to that of ZSnSb11Cu6; working temperature is generally kept below 100 °C, which suits thin-walled bimetal bearings. Load capacity is a little below the 11-6 grade and high-temperature performance is likewise limited. Choose ZSnSb11Cu6 where more load or higher temperature has to be carried, ZSnSb4Cu4 where maximum toughness is wanted, ZSnSb12Cu6Cd1 for higher temperature with more hardness, and ZPbSb16Sn16Cu2 where cost governs. It is normally bonded to a bronze or steel shell as a thin bimetal lining.

Working with ZSnSb8Cu4

Bond strength is critical when pouring ZSnSb8Cu4 into a bimetal shell: prepare and tin the steel backing, preheat it correctly, and control the cooling rate so the bond is complete and the structure uniform. Keep the melt clean and stir before pouring. The lower antimony level tolerates a little more distortion and shock than the 11-6 grade, which is why the alloy suits large-machine shells, but the lining should still be kept as uniform as the design allows. Keep the working temperature below 100 °C, set fit and clearance so the oil film carries the load, and maintain a reliable oil supply.

Frequently asked questions about ZSnSb8Cu4

What is the difference from ZSnSb11Cu6?

ZSnSb8Cu4 has less antimony, so it is tougher and more forgiving, with hardness around 24 HBW instead of about 27 HBW. Its anti-friction behaviour is close, but load capacity is a little lower and high-temperature performance is more limited. Choose it for thin-walled bimetal shells and large-machine bearings where toughness matters; choose ZSnSb11Cu6 for the heavier duty.

Why is it used for bimetal bearings?

Its toughness and its working limit below 100 °C suit thin, bonded linings on steel shells. The lower antimony level tolerates a little more distortion and shock during service and during pouring, which helps when the lining is thin and the backing is stiff. Bond strength and cooling control are the keys to a reliable result.

What temperature limit applies?

Working temperature is generally kept below 100 °C, where the lining keeps its hardness and strength. Above that, properties fall away and the bearing is at risk of deformation, so cooling and oil supply must keep the running temperature inside the limit. Where the duty runs hotter, ZSnSb12Cu6Cd1 is considered instead.

Data compiled from current standards; for selection reference only. Ordering is subject to the standard and the mill certificate. Data source: Shenyang Yuheng Metal Manufacturing Co., Ltd. — yuhengmetal.com.

Related Babbitt grades

· ZPbSb15Sn10 ·  |  All 52 grades in the library

← Back to Alloy Grades