Shenyang Yuheng Metal Manufacturing
Wear-resistant alloy castings & bearings
HomeProductsArticlesAboutAlloy GradesContact中文

Home / Alloy Grades / Cast Copper Alloy

ZCuZn40Mn2

40-2 Manganese Brass  |  Cast Copper Alloy  |  GB/T 1176

We make this grade. See the finished parts we produce with it  View products

Chemical Composition (%)

Cu57.0~60.0
Mn1.0~2.0
ZnBalance

Mechanical & Physical Properties

Tensile strength≥345 MPa (sand cast S / permanent mould R)
Elongation≥20%
Density8.50 g/cm³

Typical Applications

bearing shellsslide blocksworm wheelspump casingsflangesgeneral structural parts

Grade Overview

ZCuZn40Mn2 is a manganese brass with 57.0-60.0% copper, 1.0-2.0% manganese and zinc as the balance. Manganese refines the cast structure and raises strength and wear resistance while preserving good castability and machinability. Sand and permanent-mould castings reach at least 345 MPa tensile strength and 20% elongation.

Selecting ZCuZn40Mn2

Choose ZCuZn40Mn2 for general structural castings, bearing shells, slide blocks, worm wheels and pump casings where a lower-cost brass is adequate. Where corrosion resistance in water or seawater is important, ZCuZn16Si4 or ZCuZn35Al2Mn2Fe1 is better; where higher strength is needed, the aluminium brasses carry more load.

Working with ZCuZn40Mn2

Melt clean and avoid excessive superheat to limit zinc loss. The alloy casts readily in sand and permanent moulds and machines well. It is not heat-treatable; strength comes from the as-cast structure. Where pressure tightness is required, test before finish machining.

Frequently asked questions about ZCuZn40Mn2

Is ZCuZn40Mn2 a bearing brass?

It is used for moderate-duty bearing shells and slide blocks, but it is a general manganese brass rather than a dedicated bearing alloy.

How does it compare with ZCuZn38Mn2Pb2?

Both are manganese brasses; ZCuZn38Mn2Pb2 contains lead for improved machinability, while ZCuZn40Mn2 avoids lead.

Can it be used in seawater?

Only for mild duty. For repeated seawater exposure, choose a silicon or aluminium brass with better corrosion resistance.

Data compiled from current standards; for selection reference only. Ordering is subject to the standard and the mill certificate. Data source: Shenyang Yuheng Metal Manufacturing Co., Ltd. — yuhengmetal.com.

Related cast copper alloy grades

ZCuZn16Si4 · ZCuZn38Mn2Pb2 · ZCuZn25Al6Fe3Mn3  |  All 52 grades in the library

← Back to Alloy Grades