Chemical Composition (%)
| Ni | 1.8~2.5 |
|---|---|
| Al | 7.0~8.5 |
| Fe | 2.5~4.0 |
| Mn | 11.5~14.0 |
| Cu | Balance |
Mechanical & Physical Properties
| Tensile strength | ≥670 MPa (chill cast) |
|---|---|
| Elongation | ≥18% (chill cast) |
| Hardness | ≥170 HBW (chill cast) |
Typical Applications
Grade Overview
The 8-13-3 aluminum bronze with about 2% nickel added, used for propellers, high-pressure valve bodies, pump bodies, worm wheels and bushings. Nickel raises corrosion resistance and corrosion-fatigue strength while refining the structure and improving density and pressure tightness, so high strength is combined with better toughness: chill-cast tensile strength is at least 670 MPa with elongation of at least 18%, and hardness at least 170 HBW. Against ordinary aluminum bronzes it costs more, is still difficult to braze and is only average to machine. Specify it for marine and high-pressure pump and valve castings that need high corrosion resistance, high strength and resistance to alternating loads; watch composition uniformity and heat treatment in production, and avoid direct contact with dissimilar metals in aggressive corrosive environments. Because it is often specified for propellers and high-pressure pump parts, casting quality and metallurgical consistency should be verified rather than assumed, and machining allowances need to be planned early.
Selecting ZCuAl8Mn13Fe3Ni2
Choose ZCuAl8Mn13Fe3Ni2 where marine and high-pressure pump and valve castings must combine high strength, good corrosion resistance and tolerance of alternating loads — propellers, high-pressure valve bodies, pump bodies, worm wheels and bushings. About 2% nickel raises corrosion resistance and corrosion-fatigue strength while refining the structure and improving density and pressure tightness: chill-cast tensile strength is at least 670 MPa with elongation of at least 18% and hardness of at least 170 HBW. Against ordinary aluminum bronzes it costs more, is still difficult to braze and is only average to machine. Where the highest seawater performance and established propeller service matter, ZCuAl9Fe4Ni4Mn2 is the classic nickel aluminum bronze. Where cost is the driver and corrosion duty is lighter, ZCuAl8Mn13Fe3 or ZCuAl10Fe3 will do.
Working with ZCuAl8Mn13Fe3Ni2
ZCuAl8Mn13Fe3Ni2 is used for propellers and high-pressure pump and valve bodies, so casting soundness matters: control composition uniformity, feeding and cooling, and verify metallurgical consistency rather than assuming it. Nickel reduces but does not remove the tendency to segregation and slow-cooling brittleness, so heavy sections still need controlled cooling. Machining is average; because it is often specified for large parts, plan machining allowances early. The alloy is weldable but brazing is poor, so repairs should be welded with a controlled procedure. Where the part works against dissimilar metals in seawater, avoid direct contact or provide insulation to limit galvanic corrosion, and verify heat treatment and hardness on a test coupon with the production casting.
Frequently asked questions about ZCuAl8Mn13Fe3Ni2
What does nickel add to ZCuAl8Mn13Fe3Ni2?
About 2% nickel raises corrosion resistance and corrosion-fatigue strength and refines the structure, improving density and pressure tightness. The result is at least 670 MPa tensile strength with at least 18% elongation and at least 170 HBW in chill castings. That combination suits propellers, high-pressure valve bodies and pump bodies exposed to seawater and alternating loads.
Is ZCuAl8Mn13Fe3Ni2 suitable for propellers?
It is used for propellers because it combines high strength, good seawater corrosion resistance and corrosion-fatigue performance, which matter in a casting that operates under alternating hydrodynamic loads. The classic first choice for large propellers is ZCuAl9Fe4Ni4Mn2, the established nickel aluminum bronze; the 8-13-3-2 grade is an alternative where its property balance suits the design and verified casting quality is available.
How should ZCuAl8Mn13Fe3Ni2 be cast?
Treat casting quality as a first requirement. Control composition uniformity, feeding and cooling rate, and avoid the segregation and slow-cooling brittleness that affect high-manganese aluminum bronzes; verify consistency with inspection and a test coupon rather than assuming it. Because the parts are often large and expensive, machining allowances and heat treatment should be planned before pouring, and any weld repair handled with a controlled procedure.
Data compiled from current standards; for selection reference only. Ordering is subject to the standard and the mill certificate. Data source: Shenyang Yuheng Metal Manufacturing Co., Ltd. — yuhengmetal.com.
Related cast copper alloy grades
ZCuAl9Fe4Ni4Mn2 · ZCuAl9Mn2 · ZCuPb10Sn10 | All 52 grades in the library