Shenyang Yuheng Metal Manufacturing
Wear-resistant alloy castings & bearings
HomeProductsArticlesAboutAlloy GradesContact
EN

Home / Alloy Grades / Cast Copper Alloy

ZCuAl8Mn13Fe3

8-13-3 Aluminum Bronze (High-Manganese)  |  Cast Copper Alloy  |  GB/T 1176

We make this grade. See the finished parts we produce with it  View products

Chemical Composition (%)

Mn12.0~14.5
Al7.0~9.0
Fe2.0~4.0
CuBalance

Mechanical & Physical Properties

Tensile strength≥650 MPa (chill cast)
Elongation≥10% (chill cast)
Hardness≥170 HBW (chill cast)
Density≈7.5 g/cm³

Typical Applications

heavy-machinery bushingsflangesvalve bodiespump bodieswear parts

Grade Overview

A cast aluminum bronze whose main strengthener is manganese, used for heavy-machinery bushings, flanges, valve bodies, pump bodies and wear parts. The high manganese level gives high strength and hardness in a dense structure: sand-cast tensile strength of at least 600 MPa with elongation of at least 15%, and at least 650 MPa with about 170 HBW in chill castings, with good wear resistance, and it can serve as a wear part below about 400 °C. Castability is good and the alloy is weldable. The drawbacks are a limited ductility reserve, poor brazability, and a tendency to segregation and variable properties if composition control is loose. Choose it for heavy-machinery castings that must combine wear resistance with pressure containment; control manganese burn-off and uniformity when melting, control cooling rate in heavy sections, and preheat and manage stress during welding to avoid cracking. Its high hardness makes it a good match for heavy bushings and wear rings, and the weldability is a real advantage when a casting has to be repaired or built up.

Selecting ZCuAl8Mn13Fe3

Choose ZCuAl8Mn13Fe3 where a heavy-machinery casting must combine wear resistance with pressure containment — bushings, flanges, valve bodies, pump bodies and wear parts. High manganese gives high strength and hardness in a dense structure: sand-cast tensile strength of at least 600 MPa with elongation of at least 15%, rising to at least 650 MPa with about 170 HBW in chill castings, and the alloy can serve as a wear part below about 400 °C. Castability is good and it is weldable, which helps when a casting must be repaired or built up. Its drawbacks are a limited ductility reserve, poor brazability and a tendency to segregation and variable properties if composition control is loose. Where maximum seawater resistance and corrosion-fatigue strength matter, ZCuAl8Mn13Fe3Ni2 or ZCuAl9Fe4Ni4Mn2 are stronger choices. Where the duty is lighter and cost matters, ZCuAl10Fe3 may be enough.

Working with ZCuAl8Mn13Fe3

Melting ZCuAl8Mn13Fe3 demands control of manganese burn-off and uniformity, because loose composition control shifts strength and produces segregation. Control the cooling rate in heavy sections so the structure stays sound, and design gating to avoid hot spots. Although the alloy is weldable, preheat and manage interpass temperature and cooling to avoid cracking, which is the main risk when building up or repairing a casting. Machining needs sharp tooling and attention, because hardness is high and the ductility reserve is limited. In service, remember that wear performance is good below about 400 °C, so do not push it into hot-running duty beyond that, and allow for the thermal expansion difference when the casting works against steel.

Frequently asked questions about ZCuAl8Mn13Fe3

Why is ZCuAl8Mn13Fe3 used for heavy machinery?

High manganese, around 12-14.5%, gives high strength and hardness in a dense, sound casting: at least 600 MPa tensile strength with at least 15% elongation in sand castings, and at least 650 MPa with about 170 HBW in chill castings. Combined with good castability and weldability, that makes it suitable for heavy bushings, flanges, valve and pump bodies and wear parts.

Can ZCuAl8Mn13Fe3 be repaired by welding?

The alloy is weldable, which is a real advantage when a large machining error or a service crack must be corrected, because scrapping a heavy casting is costly. The procedure still matters: preheat, control interpass temperature, and manage cooling to avoid cracking. Its limited ductility reserve and tendency to segregation mean weld repair should be planned and inspected rather than improvised.

What are the limits of ZCuAl8Mn13Fe3?

The main limits are a limited ductility reserve, poor brazability and a tendency to segregation and variable properties when composition control is loose, so melting practice is critical. It is also not the strongest choice for severe seawater impingement and corrosion-fatigue conditions. Where those dominate, ZCuAl8Mn13Fe3Ni2 or ZCuAl9Fe4Ni4Mn2 is preferred. It is suitable as a wear part below about 400 °C.

Data compiled from current standards; for selection reference only. Ordering is subject to the standard and the mill certificate. Data source: Shenyang Yuheng Metal Manufacturing Co., Ltd. — yuhengmetal.com.

Related cast copper alloy grades

ZCuAl8Mn13Fe3Ni2 · ZCuAl9Fe4Ni4Mn2 · ZCuAl9Mn2  |  All 52 grades in the library

← Back to Alloy Grades